...noise while I'm sewing and when I check the bobbin it has little nicks all around the outside edge. Could you let us know which machine this is..... In the meantime....the damaged bobbin is not good, ...
Question about Sewing Machines
...noise. Machines can have different bobbin setups (top vs side loaded, etc) ... but what might help you diagnose the issue is to remove the needle and manually rotate the machine with the needle plate ...
...noise from bobbin area I have a Janome MC4800 that is 12 years old. It makes a "gonging" noise from the bobbin area when the stitch length is set at 2.6 or higher. I have cleaned the bobbin ...
Question about Singer Sewing Machines
...noise while winding bobbin. The issue you are describing with your Singer 9960 bobbin winder could be caused by a few different things. One possibility is that the clutch is not properly engaging or ...
Question about Brother Sewing Machines
...noise when sewing. . . then it starts to stutter then it stops & gives me an error. It doesn't occur when reverse sewing though try these suggestionschange the needle rethread the machine ...
...noise in bobbin area it's possible that there is something wrong with the bobbin itselftry changing the bobbin to a different one.try changing the needletry cleaning under the needle plate & ...
Question about Brother Sewing Machines
...bobbin thread and making a noise, take it for service. It most likely has a needle/hook timing issue and the noise could be the needle making contact with the needleplate or in the bobbin area. ...
Question about Brother Sewing Machines
...is turning I am pushing the bobbin to the left but the machine is making a whirring noise and the bobbin is not moving it will be the rubber ring. part xc 4076020 mine has just done the same
...noise. Bobbin case makes a scratchy noise when sewing, worse at higher speeds. When I 'pretend' to sew without the bobbin holder in place to try and diagnose where the noise is coming from, ...
Question about Sewing Machines
...noise? you may have over wound the bobbin the bobbin may not be inserted correctly into the bobbin case Perhaps the needle has hit something in the bobbin area, damaging the needle so now it is not ...
131 questions posted
Usually answered in minutes!
565 Questions
193 Questions
90 Questions
79 Questions