Question about Sewing Machines
My top thread keeps getting wound up in huge knot in the bobbin area Top thread nesting on bottom side is likely either top thread has escaped tension plates or tension too low. Try increasing tension
Question about Sewing Machines
...voile curtains, but the stitching keeps looping on the underside Check your sample. Is it the top thread that is looping under the fabric? That is called bird nesting or thread nesting. It ...
Question about Singer Sewing Machines
...not loop, no nothing. Just frustrating holes in the fabric: If it doesnt bring bottom thread to top then the hook is not catching the top thread. I assume your able to bring bottom thread to top? ...
...After sewing on fabric, I am able to pull the bottom thread easily out of fabric, therefore, the top thread falls out. The top thread looks very nice. I have cleaned bobbin case, rethreaded top
Question about Janome Sewing Machines
I have a1600p janome I can't get the tension set so the machine will stop making a messy loops on back of prodjects what should the tensions be set at or is there a different problem Check that top ...
Question about Sewing Machines
...to alter. Sounds like you are probably experiencing bird nesting or thread nesting which is a top thread issue. Be sure to install a brand new needle. Remove the top thread from the machine. ...
Question about Sewing Machines
what is the problem when sewing the top thread can be pulled right out and the material puckers up So, it sounds like the bobbin thread is coming to the top of the fabric and the top thread simply ...
tension on sewing machine The 'underside stitching' from bobbin is looping while the top side stitched are perfect Check your stitch sample. The looping under the fabric is most likely the top thread.
Question about Singer Sewing Machines
...stitches and verify it is actually the bobbin thread that is loose. Usually, the looping is the top thread. As a general rule, if the thread problem appears on the bottom of the fabric, it's a
Question about Janome Sewing Machines
Janome 6260 not stitching properly. skipping stiches on top and bunching on bottom New needle, clean under bobbin case and look at this.......Looping thread underneath is a top thread tension issue...
107 questions posted
Usually answered in minutes!
111 Questions
91 Questions
56 Questions
44 Questions
29 Questions