Question about Singer Sewing Machines
...seldom needs adjusting as it takes just a very small movement of the screw to make a big tension adjustment I suspect that you have bunching or birdnesting under the material and if that is the ...
Question about Brother Sewing Machines
On a brother ce 4000 the bobbin case keeps moving and slipping out of place There is an adjustment on the upper left and lower right of the case. The upper adjustment is to stop the upper part of the ...
how i can adjust the stitch ? adjust atitch A zigzag can be adjusted by the width and length of the stitch. If you start with a straight stitch it is easy to see what the length of the stitch will be.
Question about Kenmore Sewing Machines
...during the cycle. Stitch length is set to 6. This model DOESN'T have an accessible feed dog height adjustment. To adjust the feed dog height on a Kenmore 1690 (158.16900) sewing machine, you can ...
...the pressure foot is DOWN). Stitch a few more inches, recheck, and adjust some more. Just move the adjustment knob a little bit each time. You might also want to use a bit of unwaxed dental floss
Question about PfaFF Sewing Machines
How to adjust the tension disks on my Pfaff sewing machine? My top seam looks fine. The underside is loose loops of spool thread and bobbin thread that finally knot and jam. Things I've tried: ...
Question about Consew Sewing Machines
...a Consew 206rl and it won't sew on double layers of leather but sews fine on single layers. What adjustments can I make I have changed my needle adjusted everything I can possibly adjust. Double ...
Question about Sewing Machines
How do you adjust everything in the bobbin casing is there seems to be a lot of adjustments and I'm clueless Why are you wanting to adjust the bobbin mechanics? What is your machine doing or not doing
Question about Juki Sewing Machines
light fabric for juki 6700 hello concern how to adjust small narrow stitch there's two step to fine adjustment please see 2 photo 1-adjust by differential at left side when open left door. 2-adjust by
...forth to cause a zigzag motion. 2. There are screws (usually two-one locks the other in place after adjustment) to adjust. 3. One of the two must be loosened. This one will allow the adjustment screw ...
740 questions posted
Usually answered in minutes!
28 Questions
8 Questions
1 Questions
100 Questions
80 Questions