PfaFF Tiptronic 2040 "thread wrapping around spool pin" Questions

...thread gets wrapped around the spool pin. I have threaded and re-threaded the machine numerous time and know I have it threaded correctly also I didn't get the extra attachments with my machine. How ...

...my thread is wrapped around the spool pin, stuck on the little thread notch on the spool, or wrapped around a thread guide. Try removing the top thread completely and rethreading from the

...around the thread guide for bobbin winding, use your right hand to wind the free end of the thread clockwise around the bobbin five or six times. 10. Pull the thread to the right and pass it through ...

...by the tension disk which you can change by adjusting the tension dial. The spool cap merely prevents the thread from wrapping around the spool pin and also holds the spool on the horizontal

... The bottom thread is fine. sometimes the thread can get wrapped around the spool pin & sometimes the notch thats on the spool the thread can get caught on it also try rethreading the machine ...

...around the thread spool pin or one of the thread guides. Something is holding the thread from unwinding from the thread spool. Old style thread spools also have the small slit to hold the thread tail ...

thread is wrapping around the pin, a thread net can help. Give the machine a cleaning according to the maintenance section of the manual for your machine, including cleaning the feed dogs, bobbin case

...the machine, replace the needle, and rethread. Sometimes thread will wrap around the spool pin, so I use the upright spool pin or use a mug or water glass to hold the spool upright behind the

...Thread keeps wrapping around spool pin and breaking when using embroidery, how do I stop it. your machine should have come with several spool caps in various sizes find the one that is just a little ...

everything properly. Is the thread perhaps hanging up somewhere along the line, like wrapping around the spool pin, catching a rough spot on the spool, wrapped more than once around a thread guide? ..