...Pull the crown out to position No. 3, turn clockwise to go to hour and minutes hands; the small dial showing days of the week will move, and the 24-hour dial will also move correspondingly.To set the ...
Pull the crown on the side of the watch case all the way out. This will be position "C," with position "A" having the crown pushed all the way in and position "B" being pulled out halfway. 2. Turn the
...Pull the crown to position 3 (fully out) and press push-button P2 (reset button) successively until the hand of the tenths-of-a-second counter returns to its correct position. Put crown back into ...
...pull the crown out to position 3 to set the time. When you set the time, the bottom dial with also turn to set the hour on the 24 hour clock, if you turn the crown enough to cycle through a whole day ...
pull out the crown to change the time. I was still not able to pull out the crown. Another suggestion was hold in the button at the 2:00 position for 2 seconds & pull out the crown - again I could not
Question about Citizen Watches
...Pull the crown out two steps to position 2 and confirm the reference or 0-positions. The 24-hour hand, hour hand, minute hand, second hand, function hand, and date will rapidly advance and then stop ...
...Pull the crown to most extended position (2 notches) 2. Temp hand moves to a default position 3. Move hand in + or - direction by pressing temp or tide buttons (above and below crown button) 4. When ...
Pull the crown out to position 2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction that moves the date varies on different watch models. Analog
Crown: Pull crown to "MIDDLE" position and turn CLOCKWISE or COUNTERCLOCKWISE until correct date appears. 2-Position Crown: Pull crown to "OUT" position and turn CLOCKWISE until date changes (approx.1
2 questions posted
Usually answered in minutes!
14 Questions
19 Questions
2 Questions
3 Questions
12 Questions