bobbin won't wind correctly!! Bobbin won"t wind correctly too loose and only at the bottom of the bobbin no matter where I move the thread guide?? Help?? Iam very picky about my bobbins! make sure you
...bobbin (White 1740) and it clanks, check if the needle thread has come out of the upper arm. It can easily slip out of the slot. I have wound a narrow band of tape on the slot to prevent the thread ...
bobbin. On the White Fashionaire 2380 that switch is the bobbin-holder itself (the metal post it is on right now!). Push the post, bobbin and all, towards the white plastic thing (sorry, but it's late
...bobbin winding session and do lots of bobbins at once, especially embroidery bobbinfill. At any one time I would have at least six bobbins filled with bobbinfill and a dozen of various thread colours ...
Question about Juki Sewing Machines
...winding too loose. How do I adjust it? Are you running your thread through the small tension at the upper right of the machine before you run it down to the bobbin? If you are and it is still loose, ...
Question about Bernina Sewing Machines
bobbin with Metrosene thread, type 1161 white thread as your "gaging thread". Load the bobbin case so that the bobbin turns CW. Attach the bobbin case to the hook body from the machine. Wind
Question about White Sewing Sewing Machines
...winding it so that the thread winds properly. Insert the bobbin in the bobbin case and place it in the shuttle race then draw up the thread with the needle thread to prepare to sew. The shuttle race ...
...white rolls in a bag at the bargain bin, its fine for doing hand tacking but not great for quality stitching on the machine. Also thread dries out and gets brittle so always keep it in an airtight ...
Question about Sew D'Lite Sewing Machines
...White d'Lite 1750c. I turn the power off, let it rest a minute, then turn it on again, and the problem goes away for a long time (weeks, sometimes months). Of course, the settings go back to the ...
...be the clutch, but then again I don't know for sure. When my machine does this it gather's the bobbin thread in a huge clump underneath. I know that my machine is threaded correctly so that is ...
33 questions posted
Usually answered in minutes!
4 Questions
2 Questions