the presser spring... then you have probably loosened the clamping mechanism that holds the presser bar. Get back inside. Look for a mark on the bar and adjust it so that the mark is UP near the clamp
...Why do you want to adjust the height of the presser foot? Is it not correct where it is? Remember, adjusting the height when raised also affects the distance from the feed dogs when it is
...presser foot wont go up it stays down. The presser bar is not moving, there is a set screw that controls the presser foot height on the bar, it may be to tight. Take the side cover off, and look for ...
Question about Janome Sewing Machines
...adjust presser foot pressure. Space between feed dogs & presser foot is too tight to pull a piece of fabric out with foot down. Diagonal seams get pushed out. You should not be able to pull fabric ...
...adjust the height of the foot Generally, the foot height is not meant to be adjusted unless it has slipped. If it doesn't appear to go high enough or is too high, then it is a mechanical adjustment ...
Question about Singer Sewing Machines
presser foot? If the seams are thick like on jeans you may have to push/pull the fabric a little to help it along. As far as adjusting the tension it will tell you how in your manual. The presser foot
...adjust the pressure on the presser bar and in turn the foot, locate the thumbscrew at the top of the machineby rotating the thumb screw clockwise, you will increase the pressure, a counterclockwise ...
Question about Kenmore Sewing Machines
...adjust the feed dog height on a Kenmore 1690 (158.16900) sewing machine, you can follow these steps: Turn off the sewing machine and unplug it from the power source for safety. Remove the needle and ...
Question about Singer Sewing Machines
...presser foot is not applying enough pressure to the feed dogs. Check your owner manual for instructions on increasing the presser foot pressure. Could also be that the feed dog height needs to be ...
Question about Sewing Machines
Adjust presser foot from free motion back to straight stitching You need to change the presser foot to one used for straight stitch or zig-zag. The foot for free motion quilting is too short in height
110 questions posted
Usually answered in minutes!
45 Questions
40 Questions
21 Questions