Question about Consew Sewing Machines
...thread not joining with the other threads when I start sewing I have a tuffy lock Consew Serger, model #94. I have threaded it to the manufacturers instructions on the inside of the machine's door. ...
thread is not threaded properly 2. The needle thread tension is too tight 3.the needle is bent or blunt 4. The needle is incorrectly inserted into the needle holder 5. The needle thread and the bobbin
...thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set ...
Question about Kenmore Sewing Machines
...thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set ...
Question about Juki Sewing Machines
...thread will usually not work.
Remove all the thread from the machine. RAISE the presser foot (important to ALWAYS do this so the threads will seat properly in the tension ...
...thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set ...
thread is not threaded properly 2. The needle thread tension is too tight 3. Needle is bent or blunt 4. The needle is incorrectly inserted into the needle holder 5. The needle thread and bobbin thread
...thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set ...
...not chaining? Is the thread tangling, breaking? Is the thread just pulling straight through and not forming any stitches?
Suggest removing all the threads. (Cut the threads just below the ...
...thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set ...
49 questions posted
Usually answered in minutes!
76 Questions
45 Questions
21 Questions
