Singer 3820 Mechanical Sewing Machine "fixing bobbin holder" Questions

Ad

...this issue make sure the thread on the bobbin rolls away from you when you put it in the bobbin holder. insure that the bobbin and bobbin casing are installed correctly. mike (really by my wife

Ad

Question about Singer Sewing Machines

1 Answer

...bobbin holder is stacked Hi! I made a mistake and started sewing without bringing up the bobbin thread. A few seconds later the machine stopped and the hand wheel didn't turn any more. I took out ...

Ad

...bobbin holder, which I have done a zillion times and it is not fixing the problem. PLEASE HELP!!! I'm not completely familiar with the model, but even a floating bobbin holder as you described should ...

...bobbin holder and thread the feed thread over the top from the spool or thread. making sure that you run it through the auto tensioner. Set the auto thread tension to +1 to start, go ahead and thread ...

bobbin thread makes furry bottom stiches, how do I fix this? Bobbin holder tention to tight , on the bobbin holder there is a small screw loosen it a bit. [email protected]

How do I fix the bobbin holder in the sewing machine? The bobbin holder fell apart and I am trying to fix it you really can't I had the same problem had to buy a new one they are not a lot to buy

Question about Kenmore Sewing Machines

1 Answer

...bobbin holder could have tightened when you were trying to fix the needle. I don't explain them, I just know strange things happen when you try to fix one thing. Secondly, I can't tell how old your ...

Question about Janome Sewing Machines

1 Answer

...bobbin holder I removed bobbin holder to fix jam thread. how to i put it back the correct way check your manual to see how it is sitting in the machine there should be a little catch if you look down ...

Question about Elna Sewing Machines

1 Answer

...bobbin holder area as per manual (ie. remove the needle plate, bobbin, sewing foot and needle, take out the bobbin holder, clean the race area out, then put bobbin holder back in as per your manual, ...

Question about Singer Sewing Machines

2 Answers

...bobbin holder back on. I removed it so that I could figure out why the bottom thread kept bunching up while I was trying to sew jersey. So is it ruined forever or can it be fixed with out spending an ...

Not finding what you are looking for?
Singer 3820 Mechanical Sewing Machine Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...