...machine repaired under warranty three times comes back okay but after only doing one buttonhole it wont work again you have to reset the function by turning the dial normally clockwise after each ...
Wont Start (brand new) Just Beeps! I got the Singer 7442 Sewing Machine for Christmas and i took it out put it all together did everything it said and then when i go to start sewing and push on the ...
Question about Janome Sewing Machines
wont do the buttonhole. What would the problem be, please. Does it need grease inside the machine? In the bottom of the machine is where the reverse mechanism is. There is a cam that slides on a shaft
Question about PfaFF Sewing Machines
buttonhole. Used before , worked fine. Now wont pick up bobbin thread on first right side of hole but sews left side perfect. Tried stabilizer Sees reg stitches fine Be sure to use a brand new needle.
Question about Bernina Sewing Machines
...wont budge Most likely because your machine has not been serviced (oiled & cleaned) in a long time and the old oil has turned to glue and seized. This is probably the most common problem with ...
...machine just hasn't got the strength to stitch through more than 6 layers, many wont. Especially if you use buttonhole twist thread to get the read to wear jeans seam finish. I often ...
Question about Sewing Machines
Directions on how to use buttonhole foot with slide. Mine won't advance? hi change the foot switch is erratic and wont move it pls comment
Question about Singer Sewing Machines
...machine used it everywas fine now i go back to sew and it say E$ and wont start Please look again--are you SURE it doesn't say C4? That error code for your machine says there's something stopping the ...
117 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions