Singer 1120 Mechanical Sewing Machine "wind bobbin 2010" Questions

...wind the bobbin. Please check out part #2 of this tutorial for ... Pinnock sewing machine instructions 'Sewing Machines www.offou.com/pinnock-sewing-machine-instructions-sewing-machines... I have ...

...wind a bobbin. The repairman says the machine is too old that he can't fix it (there is an actual problem but it sews okay if the bobbin is wound. I bought a bobbin winder but the 2010 bobbins have ...

...wind bobbin. The needle/thread doesn't seem to be connecting with the casing. I have taken the bobbin case out and checked for foriegn matter........none, I have checked/changed the needle, I have ...

...2010 and it stopped winding the bobbin. I purchased a new bobbin case in hopes that would fix the problem, but it did not. I am also having problem balancing the stitches. No matter how I adjust the ...

...bobbin, it will not wind properly. Second, if you are using a generic or an old bobbin, you need to replace it. I have seen many machines drive the owners crazy and it turned out to be a bad

...2010/01/Minimizing-Seam-Puckering-2-5-10.pdf Usually, if it is a thread puckering problem, winding the bobbin thread more slowly, using a less elastic thread like a cotton, and reducing machine ...

...wind a bobbin now either, the bobbin case seems very loose. In 3 days it went from sewing nicely to not stitching at all. Of course I have no manual but I do have all the attachments and the machine ...

wind the bobbin. Also would stitch many rows of stitching before it would shirr. Also the heavier the fabric the more rows of stitching it takes To original poster, did you figure this out? I have the

...wind the bobbin. The bobbin does not capture the spool thread. I am able to sew with a filled bobbin, but not able to wind a bobbin. It sounds like your path for your thread around the guide is not ...

...bobbin on Singer Touchtronic 2010 Your tension is incorrect. Not enough on the bobbin to hold the thread, or not enough on the top tension to pull the thread to the centre of the material. Do the ...