Singer 1120 Mechanical Sewing Machine "settings" Questions

dont know how to adjust the settings Kenmore 158.16600 didnt come with manual.How old is it. hi there, follow this set up of thread as shown on figuresthe set up of bobbins thread wind should be ...

tension factory settings for Baby Lock serger Model BL400 The tension settings were changed on the serger. What is the correct factory setting for the dial # on the front of machine and for the stitch

...for a satin stitch? Depending upon the machine, whether it is electronic or a manual setting, most settings for satin stitch are shown as a zigzag with Length being the primary changeable

Tension setting for straight stitch on husqvarva topaz machine How to set tension on husqvarna topaz 50 machine The standard setting when the machine leaves the factory is the midway point between ...

What is the normal tension settings for normal 4 thread overlocking Depends on the Brand and Model. On my Bernina 1150, if the tensions are set in the middle, it is usually a good tension setting. ...

...Make a sample of the stitches by sewing on a folded scrap of plain cotton or muslin and mark the settings used for future reference. Do the same for the zig-zag settings and this will save a lot

My Kenmore sewing machine model number is 17630, & when I try to set the stitch length from a Straight Stitch setting to a Straight STRETCH Stitch setting, there isn't any difference. I have the ...

...dials. This is generally the setting for a basic overlock stitch. However, different tension settings is how different stitches are created. Be sure thread is in the tension docs properly, a ...

I changed broken needle but accidently both of them came out now the left needle does not stay in Assuming this is a serger? Is there only one needle set-screw on the machine or one set-screw for each

How do you change the default stitch length. I have set the length I want and press and held the default button but it will not change. The machine constantly moves from my setting to the default ...