Question about White Sewing Sewing Machines
...thread can move or does it get stuck? If it gets stuck the tension control may need adjusted or cleaned. 5. Pull the bobbin thread above the throat plate and pull on the thread. It must have some ...
...stuck Is there is a wad of thread that is holding the bobbin captive? If so, you'll need to use small scissors and tweezers to snip away and pull out the threads. Patience! If the bobbin is actually ...
...stuck around the bobbin case. I could not remove the bobbin case; the machine seems frozen, so I tweezed all the threads from around the bobbin case. Sounds like thread or lint has got on the centre ...
...stuck and there are many pieces of thread coming up from the bobbin and get stuck the second question is everytime i try and thread a new bobbin the thread only gathers on the bottom to half way up ...
Question about Sewing Machines
thread is stuck inside my innovis-v7. can you tell me how to get it out please Where is the thread stuck??? If in the bobbin area, cut the top thread, then try to remove the bobbin case. If unable to,
...thread stuck on the spindle? If the bobbin is inserted the wrong way, sometimes thread can get stuck on the spindle. Another reason could be that the thread is not pulled all the way through the ...
Question about Singer Sewing Machines
...and the thread through the needle is getting stuck on something when the threaded needle is in the down position while trying to pick up the bobbin thread without success. Try changing your ...
thread is stuck in bobbin THREAD STUCK IN LOWER BOBBIN IS COMMON BUT GETTING THE LOWER BOBBIN OUT IS THE HARD PARTYOU WILL HAVE TO FIND OUT HOW MUCH THREAD IS RAPPED AROUND THE OTHER ITEMS IN THE ...
Question about Brother Sewing Machines
Thread is stuck under the bobbin seat. There is a lot of thread wound under there and I need to get it out. How can I do this? Until the thread is out, the bobbin won't be able to thread. Please help!
Question about Sewing Machines
...thread correctly. Remove bobbin, bobbin case. If it is stuck, do Not, do not force the assembly, rather look for tangled threads and calmly snip the thread and remove. Once the tangle is gone, remove ...
143 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions