Singer Featherweight 132Q Mechanical Sewing Machine "tension bottom thread" Questions

...bottom thread (bobbin) tension. Be sure it is top thread. Use a different color top vs bottom color to know for sure. If you find it is bottom thread, likely cause is thread escaped bobbin case ...

...down. If the bottom thread tension feels loose, similar to top thread presser foot up, then likely the bottom thread has escaped the bobbin case tensioner. Reload bobbin and recheck bobbin

...BOTTOM. TO CORRECT THIS YOU INCREASE THE TOP THREAD TENSION. IF THE TOP THREAD IS PULLING HARDER THAN THE BOTTOM THEN A GREAT DEAL MORE BOBBIN THREAD WILL END UP ON THE TOP. TO CORRECT THIS YOU WOULD ...

...bottom tension or reduce the top tension .. you will notice a little screw on the bobin case ... that screw adjusts the force on a small flat spring which provides the bottom tension (the thread goes ...

...bottom means you have a problem with the top thread. In your case there is no tension on your top thread. Take all the thread out of the top and start threading over. Make sure you follow the correct ...

...bottom thread is not seated in the tension disk or is threaded correctly. Grasp the thread between the thread tree and the tension disk and also grab the thread below the tension disk and gently pull ...

...tension is too loose, the bottom thread is pulling the top thread down through the fabric. Tighten the top tension by turning the numbered knob on the front of the sewing machine clockwise by one ...

...bottom , Thread tension won't adjust properly. Top thread is ok, but bottom thread is a straight thread. What can I do? This is a heavy duty White machine. I could be as simple as threading the ...

...bottom tension should be near the same when top thread tension is set at 4. If you find an extreme difference in top/bottom thread tension at 3 then something is amiss. Re-thread per machine ...

...tension from bottom or upper tension, With presser foot down check to see if you pull thread that you feel tension from pulling bottom thread and that you also feel it from upper free pdf manual here ...