Singer Featherweight 132Q Mechanical Sewing Machine "stitches loose side material" Questions

...side of the stitch the TOP tension is too loose. Increase the top tension. Now take some scrap material and set machine to a wide zig zag, medium length stitch and sew a bit. Compare the top and the ...

is loopy then the opposite side tension is too loose (or, sometimes that side's tension is too tight). Adjust until both sides are identical looking. Then try stitching in the ditch like you wanted to

...stitches. I've tried every number of thread tension, and even on 0 it loops on the right side of the material, not on the back. Check the tension on your bobbin thread. When you hold it by the thread ...

loose stitches every 1 Hi. I have a Janome, Memory Craft 6600. The stitches look fine on the right side but on the back every 1" the stitches are all jumbled up and when you examine a little closer ...

Can't get a neat straight and stretch stitch underneath Hi, I'm using a Janome 2522LE and sewing through some tough materials, however the machine seems strong enough to cope with this: stainless ...

...loose thread on my material. have you tried changing the needle-if the needle has a flat side goes to the back of the machine-round needle the groove faces away from the shaft check the top thread ...

...side is loose as if the bobbin isn't in right or maybe a tension issue? The bobbin appears to be in correctly as far as I can tell. If the threads on the back are loopy, you need to tighten the top ...

stitches doesn't look right. They seem to pull the material and it makes almost like a fray look? I am not sew savvy so is this the tension for the bobbin? If so exactly how do I fix this? try

loose and skipping stitches? Many reasons for this. Old bent needle. The needle in serted incorrectly. Make sure it is pushed high in the shaft. Ifit has a flat side make sure it is inserted correctly

...loose stitches Try re threading the needle. and try a new needle. Make sure th thread and needle are the size required for the material used. Make sure the needle tension is correct for the material. ...