Singer 5050 Mechanical Sewing Machine "backstitch reverse" Questions

reverse stitch button for the first 3 or four stitches but I can't make sense of that. https://www.facebook.com/karen.m.sewing/videos/how-to-fix-the-backstitch-on-many-later-model-janomes-and-kenmores

...backstitch button...though I was able to take off the top section by undoing screws near the carry-handle. Ideas? Is sewing machine set for buttonhole making? Sounds like it got "confused" in the ...

...backstitch over the beginning and end of your stitching, Jodie. When you start out, manually turn the wheel to put the needle into the fabric. Push the foot pedal to stitch forward a little. Now, ...

backstitch!!! Two problems: A: machine is "gummed-up" form old grease. Solution: degrease machine with a high quality degreaser.. I used a spray electrical degreaser from an automotive store. Turn the

backstitch Do not have manual Unless there is a specific button to do reverse stitching, you could try pressing the foot peddle 'backwards' .. in other words, press with your heel rather than your toe

...reverse. The switch that goes from normal (3 oclock position) to backstitch (press and hold just below 3 o clock position) to constant backstitch (12 o clock position) to darn or dropping the feed ...

...backstitch button is pushed then thread snaps May be an issue with the feed dogs, or possibly a burr on the hook. Lay a peice of scrap material under the foot as if you were going to sew, remove ...

reverse stitch or backstitch? Consult your owner's manual. Unless you have a very old machine, there is usually a reverse button. On really old machines, the sewist would have to lift the presser foot

...the backstitch Make and Model, backstitching is usually the lever or adjustable know that makes machine go in reverse..usually near front, either underneath where throat is or on front part of ...

...sew, but a week ago, it will only sew forward when turned in the reverse direction, or when set to backstitching. Is there anything I can do to fix this? Check the stitch size adjustment , which is ...