Singer 2517 Mechanical Sewing Machine "thread spool cap" Questions

...thread spool on the spool pin so that the thread unwinds from the front of the spool. Horizontal spools require the spool cap be equal or greater in size than the spool diameter. Using a smaller cap ...

...spool of thread on spool pin. 3. Slide spool pin holder/cap (illustration 2) firmly over rim of spool to prevent thread from tangling. 1. Push in indent (illustration 1) on hand wheel disc. This will ...

...thread spool that is cross-wound (the thread is wrapped on the spool in an "X" shape) will work better on a horizontal spool pin with a spool cap. Thread spools where the thread is wrapped beginning ...

...spool cap keeps the thread in place and helps the thread unwind evenly - so if you are using a spool pin, you really do need a spool cap. If the spool stand works, you are good to go. If you need to ...

...Does the thread run through the cap/holder? Or does it just hold the spool of thread in place? This is using the horizontal thread and a top loan bobbin. my CG550 is running very slow I need

...thread snagging on spool). This machine has a horizontal spool so be sure the the spool cap is larger than the spool and double check with the manual on which way the thread is supposed to come off ...

thread spool on the spool pin so the thread feeds from the back of the spool. Place spool cap against the thread spool. Take the thread across to the first guide, then down the first slot, back up the

spool pin and take the thread through the hole of the spool cap. From this point thread the machine normally. This and many other common questions are found on this link click here http://www.babylock

...presser foot lever in the UP position and tension set at 4, follow the threading guides/graphics on the top of the machine. Place the thread spool on the spool pin and secure with a thread spool

Be sure to use a spool cap that is larger than the spool. Pay close attention to the direction the thread falls from the spool. Flip spool end over end to correct. Comment below for further assistance