Singer CE-100 Futura Computerized Sewing Machine "machine keeps binding" Questions

...keeps stopping machine. Machine is squeaky and smells hot. (Futura 100) Sounds like their is a bind, you will have to have your local dealer inspect it. Either the machine needs a full oiling or ...

activate if the machine has a bind or is unable to run at correct speed. If you turn the handwheel is it tight/hard to turn? if it is than thats it. Now what is binding the machine has to be diagnosed

...keeps binding up under the plate thread binds up under the plate and can't move the needle up or down. I have to remove the plate and remove a ball of thread that builds up over a projection behind ...

...machine model 1866, it keeps binding up, the foot feed will not move like it should, is there an adjustment somewhere? is there an online manual somewhere? On the singer website on the home page look ...

Where is the reset button on Elna6004 6004, overload message keeps appearing Overload message keeps appearing,has power will sew for a bit then say overload when not overloaded with fabric The message

...keeps binding up. I am new to sewing and asked a friend, they said it was a bobbin problem so I change it. I started sewing again and problem still there. Need some advise. Thanks It sounds like the ...

...machine has run beautifully for over 40 years with only one visit to an authorized dealer (for a replacement motor) in all that time. Phillip Have you been oiling the bearings per the guide? Try to ...

thread keeps breaking at needle is there adjustable tension on thread to spool? make sure it is not binding anywhere

binding or jams. Could be the problem is inside the foot control/cable. Disconnect foot control and try using START/STOP and see if the resets stop. I noted the following in the manual; "Never operate

bobbin keeps binding Are you sure it's the correct bobbin for your machine?