Singer CE-100 Futura Computerized Sewing Machine "correct timing" Questions

...and it works fine for a short time then starts to do it again Check that your needle is inserted correctly. It sounds like it might just need a new needle which is the easiest thing to try. Also ...

...correct first.  If you are sure the needle is right and oriented correctly then it's definitely a timing issue When I say "********" I'm not talking mental capacity... I mean the hook of ...

...for the first time. If you have verified the correct needles are being used and they are installed correctly, then you most likely are experiencing a timing issue. Time to take it for service.

...correct length and in correctly needle and hook timing out check by removing the plate and slowly turning the machine by hand watch the needle go all the way down and just as it starts back up, the ...

...correct timing this model tends to slip timing quite easy....its about .75 of an hour to fix....a dealer would be the one to look to make sure. But 2.4 mm from bottom dead center to having the hook ...

...correct direction in the bobbin case, and the bobbin tension is threaded correctly. If it still will not pick up the bobbin thread, there is most likely a timing issue, ie the needle is arriving at ...

...correct needle, that it is inserted correctly, that it is threaded correctly, and that top tension is set correctly. Any of those four things will cause that. Other than that, it might be a timing ...

...timing appear off? Other, more common, things that can appear to be timing related include: 1) incorrect needle or needle is set wrong 2) wrong bobbin or bobbin isn't seated correctly 3) upper ...

correct direction. There is a flat side at the top that needs to inserted correctly into your machine--unfortunately machines vary. Most often the flat side either faces the back of the machine or the

...Timing has nothing to do with it. You have to have the correct size needle for both thread and material. Plus correct tension. Plus the correct thread for your material. Make sure both bobbin and ...