Question about Sewing Machines
...c20 sees a few stitches stops and beeps. When it stops beeping it will sew a few stitches and stops and beeps The beep is a warning of a problem. If it continues, you should take it for
Question about Singer Sewing Machines
...few stitches I just tried my new machine and it will only sew a few stitches when straight sewing before it quits and beeps. This is very frustrating. Look for the buttonhole lever, just in front of ...
Question about Sewing Machines
...then i can start sewing again for a few stitches and the beeping and stopping returns. I can't seem to figure out the problem What is the problem? when was the last time the machine was
s Singer curvy 8770 beeps after a few stitches!! After checking thread, Needle, bobbin and all else..machine constantly Beeb's after ten or so stitches. Customer Support ,,,,
...it for about a week straight. Now it beeps and stops sewing. It will go again but only a few stitches and beeps and quits again. I have the same problem and no any solution, someone can help,
Question about Singer Sewing Machines
...stitches and then stops and beeps twice. There are no errors and if you press the pedal again it does the same thing. I have read multiple posts and the button hole lever is up. Any suggestions? I do ...
What causes the Futura CE100 to beep constantly? After a few stitches, the machine beeps. It may need to be re threaded or the stitch length is not right.
Question about Singer Sewing Machines
...of amber and it beeps and stops after a few stitches. look in your manual for a factory reset button or menu, that should take it back to the condition it was bought in an then it should work for ...
...few stitches. I'm very frustrated. HI, Did you make sure that you raised the feed dogs? There is a sliding button on the front that you have to move sideways to let the feedogs come up. If not the ...
Question about Singer Sewing Machines
...few stitches, beeps and after a few seconds repeats On some machines, it means the machine is not set up to begin stitching, ie the presser foot is up, the bobbin winder is activated, etc. You might ...
438 questions posted
Usually answered in minutes!
760 Questions
564 Questions
252 Questions
263 Questions
235 Questions