Singer 6038 Mechanical Sewing Machine "top thread loops" Questions

...top thread issue (check your stitch sample, is it the top thread or bobbin thread that is looping?). Looping under the fabric is called bird nesting. ALWAYS RAISE the presser foot when threading the ...

...thread on top to loop up? the bobbin or top threading?? It's loose but the bottom looks great General rule of thumb:: loops on the bottom, problem on the top. loops on the top, problem on the bottom. ...

...top thread or bobbin thread is improperly threaded it can cause looping stitches. ... Loose thread tension will create loose loops of thread that can cause the needle to catch and create more of a ...

...top thread is looping, right? Re-thread your top thread, making sure you floss it into the tension system. When you drop the pressed foot it should offer tension to the thread. Right? When you have ...

Top thread stitches correctly but bottom thread loops. Tried adjusting the tension but nothing helped. Adjusted tensions. brand new machine. just trying to get aquainted. top stitches are great bottom

...top thread. In your case there is no tension on your top thread. Take all the thread out of the top and start threading over. Make sure you follow the correct path and make sure the thread goes ...

...top. Pull the thread out of the needle and and put the presser foot down. If the thread pulls thru easily, then you need to rethread your machine making sure the thread is thru the top tension wheel ...

...top thread of a seam go like a straight line and the bobbin thread loops on top of the seam.  Then back off of the top tension until those loops disappear.  If you never see it the top ...

...top thread underneath. Tried fixing the tension on the bobbin thread as they state in the manual, but the problem still persists. Any suggestions? If the thread is looping underneath, you're top ...

...top thread properly... Start by rethreading carefully with the presser foot UP. Then do a test stitch, remembering to put the presser foot down. If you still get loops underneath... tighten the ...