Singer 6038 Mechanical Sewing Machine "broken" Questions

broken thread spindle This is second Babylock Protege I've purchased online used that arrived w/ the #4 (far rt) thread spindle broken off at base. If I can figure out how to test the machine ...

touch screen on b580 is broken broken screen, when i touch the screen it doesnt move to picture on screen if the screen is broken then it will have to be replaced by a technican at a sewing machine ...

the screw on the needle bar is broken can't get the needle out the screw broke flush to the needle bar . what do I do. hi it's easy don't worry about that , just try to move needle to left and right ...

...machine has just started "sewing" whilst I wind a bobbin , could it be one of the belts broken ? Unlikely that a belt is broken. It is more likely that you don't have the bobbin spindle ...

futura troubleshooting sews 8 stitches then E1 shows up. That means broken thread or bobbin is out. And everthing is fine. it does it on regualr sewing also! 3 possible causes, Top thread is broken or

How to remove broken off needle from pfaff machine why is bobbin not working Where is the broken needle stuck? The broken upper part should just come out like a regular needle (via the needle-screw). ...

does not stitch, it use to after a broken needle the problem started help after changing a broken needle it fail to stitch it sound like the broken needle caused the machine to go out of time & ...

broken thread warning when thread not broken My machine stops and tells me thread is broken but it is not really broken how can I reset it That happened to my daughters machine. If when you thread you

I have a Janome 15000. tried to sew straight and regular stitches but is says thread broken. not broken but not sewing properly. comes undone. Bobbin area clean. Janome 15000 is a few years old. used ...

I have a Bernina 580 that is continually showing a broken thread alarm when the thread is not broken. It runs for about 10 seconds after being restarted and then stops showing broken thread Quite ...