Question about Brother Sewing Machines
fell off. The needle clamp won't stay on nor will it hold the needle in place. just adjust to needle in fix to strait in needle clamp hole it operate to needle strait to hole so needle do nt break but
Question about Brother Sewing Machines
...needle guide fell off while I was sewing. I can't get it back on. Need instruction. try a youtube video ...
Question about Brother Sewing Machines
...needle in place fell off and another long piece of metal fell out. The long piece is part way straight, and then curves around perpendicular to the strait part doing a 3/4 turn. I am not exactly sure ...
Question about Sewing Machines
...needle fell down inside machine what do I do to get it out Needle fell through hole and went down inside the machine behind bobbin case how do u get it out you should be able to take the bobbin case ...
...fell out and needle won't stay in...it's a brother XR-35 What fell out was the needle clamp gib - a small wedge-like part that presses on the needle to hold in place. You may be able to get it ...
Question about Brother Sewing Machines
...needle in place fell off and another long piece of metal fell out. The long piece is part way straight, and then curves around perpendicular to the strait part doing a 3/4 turn. I am not exactly sure ...
...needle goes into fell off and the thread guide fell off it....i can't tell if it is broken or just fell off, but i can't put the thread guide back in...it just falls off. That can be tricky. Some ...
Question about Brother Sewing Machines
...needle threader from a brother sewing machine HE-240 fell into 3 pieces, can you get me a diagram so i can fix it? this is all i can find so not sure if it will help you out... Fixing common sewing ...
...too try sewingpartsonline.com whole part that has needle in fell off, needle is still in situ but its not obvious how to get the whole holder to stay on pole, it goes on and falls right off
Question about Singer Sewing Machines
...needle fell into the needle plate, first remove the needle plate. You need to loosen and remove two screws. Then lift off the needle plate. I think you should be able to see the needle between the ...
15 questions posted
Usually answered in minutes!
125 Questions
116 Questions
88 Questions
79 Questions
49 Questions