White Sewing 1418 Mechanical Sewing Machine "tread bobbin" Questions

...bobbin in the case with the tread facing towards your left hand and others facing the right hand. While holding on the case there's a little arm that fits upward in place so the tread can be retreved ...

...bobbin tension to try to adjust that. The tread only breaks in the needle. what can i do . i don't get to sew anything . I tread the needle and get everything ready and start the machine and as ...

...tread jame under the bobbin case. After sewing as started it can go on or if you stop and re-start it could be OK or it will start jamming again and have to get the tread out which isunder the bobbin ...

...tread is "looping" on the front of the material. I think it's the bobbin, but I'm not sure. Loops on the top of the fabric are signs of the bobbin thread being too loose. Linda at ...

...bobbin goes under the door of the needal, the thead come out from the right to the left, thead goes in the first edge and up and out of the left, you need the needal to be treaded, turn the round ...

...It could be different things, the tread may not be locked in the top tension, you may have treads all wrapped up around the bottom bobbin. Take out the bobbin and look, re-thread the entire

...bobbin tread, I follow the instruction manual step by step as well as videos on youtube. when you put the bobbin in the carrier make sure you have about 6" of thread out next adjust the needle thread ...

...BOBBIN CASE TO YOUR RIGHT JUST A LITTLE FROCTION EACH TIME YOU DO THAT TRY SEWING SEE IF THERES ANY CHANGES 2-MAKE SURE YOU TREAD THE SEWING MACHINE RIGHT AND CHECK THE POSITION OF YOUR NEEDLE SEE IF ...

bobbin winding tension disk it as if the tread is suppose to catch something if but it doesn’t. I really need help. It appears the first two steps are the same as for top thread but rather then taking

...bobbin in the bobbincasing with tread and guide so the needle goes down to bring bottom tread up nothing happens it doesnt feed it to come up i keep trying and nothing what could be try changing the ...