White Sewing Speedylock 1600 Mechanical Sewing Machine "loose" Questions

Viking 1: where is the bobbin control, my bobbin is loose... Where is the bobbin control my bobbin is loose The bobbin spool is loose, the bobbin case is loose or the bobbin stitches are loose?????? ...

the stitch is out of adjustment.top stitch is too loose Check the upper tension unit for loose threads or fluff. This causes the discs not to completely close when the presser foot is lowered. If the ...

bottom tension too loose , tried tightening screws, but still loose, Janome Jem machine bobbin thread is very loose, letting loops on the top. Top tension is set fine. When pulling bobbin thread, it ...

How do I adjust a too loose tension? The tension on my Bro. cs6000i is too loose. The bobbin thread is showing on the top, and the bobbin side of the fabric is very loose Sound like your top thread ...

loose part I have a Brother Pc-6000' The white plastic piece where the thread comes down the front and then goes back up is loose and moves around when sewing. Have taken the case off where the light ...

Doing zig zag the bottom thread is so loose - what is wrong? What is wrong with my model 3610 when doing zig zag the bottom thread is so loose.... the needle thread tension is too loose tighten it up ...

harrision gc5550. Why is bottom stitching loose? Usually, loose threads under the fabric indicate a loose upper tension. Be sure that you RAISE the presser foot BEFORE threading the upper thread. This

...Upper thread breaksneedle may be in backwardsRaise the needle bar to the highest point, then loosen the clamp screw to remove the old needle, place the new needle in the clamp with the ...

I do a lot of hemming on my machine, the underneath stitch is real real loose, I tried adjusting stuff, still is so loose I have to cut it and begin again, thanks Is your top thread not pulling the ...

when i sew, the bottom part is loose and loopy,, when i sew, the bottom thread is loose and loopy,, Singer model 411g top tension is loose