White Sewing 2037 Mechanical Sewing Machine "put bobbin case" Questions

...put the needle plate on before you install the bobbin case. You can lock the bobbin case down by putting the needle plate on after putting the bobbin case in. Take off the plate and remove the bobbin ...

...put bobbin into bobbin case the entire bobbin case came out of sewing machine. Now I have removed the metal plate and am unable to place bobbin case back into my sewing machine. The Singer Manuel is ...

...Put the bobbin into the case so the thread is feeding clock wise and through the guide on the case. Lift the lever to hold the bobbin in place. Insert the bobbin case into the race/shuttle, still ...

...with it since. Good luck. the bobbin case needs to SNAP in Your manual tells you how to put the bobbin case back in after cleaning out the lint in the bobbin area. Iocksup when the bobben is ...

...put the bobbin back in the case without pushing the bobbin hook cover back. Now I can't get the bobbin out of the bobbin case. take a small screw driver and gently lift an edge of the bobbin to lift ...

...PUT THE BOBBIN INTO. I ORDERED A BOBBIN HOLDER, BUT THAT IS NOT IT. The bobbin fits into a bobbin case (holder), the bobbin case is what you take out to put a new bobbin in. The bobbin case fits into ...

bobbin to clean and when put them back the needle hits the metal of the bobbin case and i cant sew. it doesnt seem to be properly aligned. Perhaps remove the bobbin case and check that you have put it

...put the bobbin into the bobbin case so that the bobbin runs clockwise. Passing the thread through the **** of the bobbin case, continue passing it under the thread tension spring, and pull out the ...

...bobbin, make sure you put it in right, hold the bobbin between you thumb and first finger of your right hand when you pull the thread with left hand it should rotate the bobbin counter clockwise. If ...

...put the bobbin in its case then pull some thread out and pass it thru the bobbin case slot and under the tension spring .. put the bobbin and case over the shaft that is in the main unit .. the open ...