Question about Sewing Machines
...needle hitting shuttle If you are inserting the shuttle and locking it in place but the needle continues to hit, the needle may be bent. If a new needle is installed and it continues to hit, most ...
Question about Sewing Machines
...needle may be hitting the internal mechanism of the machine. If the needle is still hitting, it is most likely a timing issue. There are lost of web sites and videos on the internet that address ...
...Needle is hitting something and not going into hole turn the machine slowly by hand as the needle goes down check it does not hit the foot ,then the hole of the plate. If it enters the hole and then ...
needle. Look very carefully - the point of the hook/shuttle should be just above the top of the thread hole in the needle .... if it's below, or significantly above, the timing on your machine has
Question about Singer Sewing Machines
...shuttle hook should be pointing right at the needle scarf, ready to go past it as the needle starts to go up. When the needle starts its upward travel it forms a loop... the shuttle hook enters ...
...time, there are either fabric or thread stuck. If not, make sure the needle is not hitting the feed dog or the hook. Sound like there is a thread jam somewhere. Check the bobbincase and hook
...needle keeps hitting something Rare timing problems with the 930. I created this technical document for Bernina dealers in 1986. Hope this helps. Also to check for the timing of loop lift, please see ...
i put in new needle an try to sew but the neddle hits the shuttle hook an bens the needle what to do I'd say that the timing is out; this is generally a job for a sewing machine technician
...Needle The shuttle hook on my singer simple keeps catching my needle, bending it and sometimes I have to wiggle it loose to avoid breaking the needle. I have tried it with the bobbin case in and out ...
Question about Singer Sewing Machines
needle is not in all the way it will bottom out in the shuttle, or if you bought new needles and accedently got the wrong ones. If the needle does not enter the needle plate far enough to be bottoming
50 questions posted
Usually answered in minutes!
61 Questions
39 Questions
30 Questions
31 Questions
25 Questions