Cobra MicroTalk PR 1100 WX (15 Channels) 2-Way Radio "turn" Questions

shutting the beep sound off when you turn on talkabout T7150 how can i shut the beep sound off on the talkabout T7150 when i turn the unit on? Button Beeps Every time you press a button on the front ...

...sound off when keying it my two way t5950 beeps when i key it i helded the {+} at the same time i turned it on and it seems to take the beep off i guess will see if it happens agian , thank you for ...

...procedure for the Kenwood TK-270 or TK-370 handhelds. Press and hold (light) & (dial) while turning on radio. Hold until (SEL) appears on the display. Pressing (SCN) allows you to program the ...

...procedure for the Kenwood TK-270 or TK-370 handhelds. Press and hold (light) & (dial) while turning on radio. Hold until (SEL) appears on the display. Pressing (SCN) allows you to program the ...

...should radio receives weather frequencies if you are close enough to a reporting station: 1. After turning weather reception on, press . The current Turning Weather Channel Reception On and Off 1.

...output to a "dummy load" (such as a 50 ohm resistor network in a gallon can of mineral oil), turn the output power to max, operating mode to CW, and hold the key down with a weight. The output ...

...the courtesy beep option from radio, this is also call Roger beep. Here's a solution finally!! Turn on the radio and press the + button, then while holding it down turn off the radio and then ...

...the owners manual explaining the simple procedure. ?Roger? Beeps/Talk Confirmation Tone When you turn this feature On, your two-way radio transmits a unique tone when you finish transmitting. It?s ...

can't turn one unit off when I turn the volume allthe way down I get no click and the unit stays on I have one unit that will not shut off I reduce the volume all the way down and the unit does ...

Squelch won't turn off, won't go into power save mode Power-save mode means the radio is being turned on and off repeatedly, to save power. The radio turns on, & if it hears any signals (i.e., if ...