Minolta EP4000/5000 CS/PRO Copier "toner sensor level" Questions

...toner level sensor for each color: 0F52H Toner level sensor /Y malfunction 0F53H Toner level sensor /M malfunction 0F54H Toner level sensor /C malfunction 0F55H Toner level sensor /K malfunction -- ...

...toner level sensor for each color: 0F52H Toner level sensor /Y malfunction 0F53H Toner level sensor /M malfunction 0F54H Toner level sensor /C malfunction 0F55H Toner level sensor /K ...

...COF32 is an ATDC sensor failure. (toner density) The ATDC value might be wrong if you just renewed the toner. Adjust the ATDC value in the service

Toner sensor. u can do this steps : Disconnection of the wire used for detecting the connection of the toner level sensor is found. When the disconnection of the wire used for detecting the connection

...to get level to normal ( in many models this may not be possible) --- if not ---- recheck the toner quality ---- if not ---replace sensor..---- if not throw the machine ----- buy a new one

toner sensor (TS1) and may be shorting out the sensor. Blow out any toner in the sensor wiring and check to see if measure resolved the symptom. The toner level sensor has an open-circuit, replace the

Toner Level Sensor konica 2223 what about the toner level sensor for the Konica 2223????

toner sensor (TS1) and may be shorting out the sensor. Blow out any toner in the sensor wiring and check to see if measure resolved the symptom. The toner level sensor has an open-circuit, replace the

toner sensor (TS1) and may be shorting out the sensor. Blow out any toner in the sensor wiring and check to see if measure resolved the symptom. The toner level sensor has an open-circuit, replace the

...toner level sensor is found. When the disconnection of the wire used for detecting the connection of the toner level sensor has been detected for 7.5 min without interruption (12.5 min in the manual ...