Question about Minolta Office Equipment & Supplies
...reset the error: 1.open the front door with the machine left on 2. locate a small square hole inside the front door towards the bottom right. 3.insert a small object such as a small ball point pen to ...
...the imaging unit removal tool. Note: after opening the front door, it is in the lower right corner. 2. Insert a suitable object into the hole to actuate the reset switch. HOPE THAT HELP LET ME ...
...similar. Then close the door. This should reset the code. All this must be done with the machine swiched on. Don't worry, as soon as a door is opened on the machine, the power disappears :-) Good ...
reset the code Open the front door and close it. Restart the machine. Press utility/counter button and keep it pressed, now restart the machine.Do not release the button until the trouble reset option
...reset. Open front door and locate main power switch on the bottom left and turn off. Press and hold the reset button , button on control panel. Turn main power switch back on whilst pressing ...
Question about Minolta Office Equipment & Supplies
door. TO reset a small paper clip. On the side of the operation panel (right Side) is a small hole push the paper clip in there it will hit a small switch the do this with the power on the screen will
Question about Minolta Office Equipment & Supplies
...where it goes look in the back for broken gears, remove the drum assy. check for broken gears, open close the front door to reset, If it comes back get a new main motor and or main control
Question about Konica Minolta Office Equipment & Supplies
...reset the code open then close the front door where you put the toner. Turning the machine on and off will not reset the code. but open and closing the front door will clear about 80% of the service ...
...sensor under OPC drum,press the reset switch after open the front door.Enter into service mode (press STOP-0-STOP-1) select F code history ,open and close the front door,press menu,press reset
...door then look to you upper left. See a small access cover remove one screw the press the trouble reset button. Machine must be on. If the code come back do not reset you are resetting codes for the ...
378 questions posted
Usually answered in minutes!
106 Questions
93 Questions
72 Questions
71 Questions
72 Questions