...BRICKS AND HAS EXCESSIVE GAS FUMES APPEARS TO HAVE A LARGE FLAME WHAT CAN IT BE can you turn flames down with the control knob ,if not you need control gas valve,that if burning right gas for heater ...
bricks out but it is still doing it. do we need to change the brick ? and if so how do we change it? the flame is blue and otherwise works good. call the gas company to have it serviced sounds like it
...bricks need cleaning. I imagine the flame is burning blue instead of glowing red in the middle brick. Contact your local propane or natural gas dealer about getting the heater cleaned. This type of ...
...bricks not sure what it is called maybe a regulator of some sort.... anyone have ever had this happen and what can be done thanks bill I have the same htr in Mich. & have worked on gas htrs.for ...
gas chimney behind the brick. Tie 2 pipe cleaners together with a small perpendicular circle at the top and carefully remove the dust bit by bit by twirling the cleaner. The brick should fire like new
flames out in front of area now.......sound normal or something to be concerned with? I had this problem. From using the center brick most of the time, lots of dust bunnies build up in the gas chimney
Question about Heating & Cooling
3 brick htr only works on 1 brick (low) setting .flame flutters on 2 brick (med) and won't come on on 3 "brick" hi setting. Help? Its running out of gas pressure
Question about The Companion Group Heating & Cooling
...bricks turn red after the heater has been on for a while. The third one always burns blue and the flames 'lick' the top of the inside of the heater. Do you have any idea what could be wrong? Yes, it ...
Question about Peavey Heating & Cooling
My propane wall heater sounds like a blow torch when it kicks on and shotts flame out the front. I tis one with the bricks. Get a vacuum cleaner and clean the dust off the bricks is what I would do.
What is making my gas space heater burn blue flames up above the bricks? Hi, The gas pressure is too high... Lower the regulator gas pressure or adjust the pressure at the gas valve down. heatman101
27 questions posted
Usually answered in minutes!
9 Questions
6 Questions