GE WNSE5260D Top Load Washer "cycle duty heavy" Questions

...duty Cycle does not work properly, or will not come on. Sometimes it strains and causes lights in room to dim in unison with agitator, or will not come on at all in heavy duty cycle, but this is not ...

...duty cycle. My washer overflowed (I had the level switch between tow settings). Now it works , but only on the heavy duty cycle. When I try on the other duty cycles when it starts on the agitate ...

duty cycle. Not a whine just a over working sound. What could be the problem. I think I answered this before. Get an electrician to check the motor windings etc to see if there is a problem under load

...duty cycle,but it pops the breaker within 2 minutes of starting,i changed the motor and it worked for 2 months (in the heavy duty cycle only)before it started popping the breaker again. I would try a ...

it will continue on to the next cycle and run the next cycle. my heavy duty 7 speed motor cut off because of over heating and the belt was changed can you suggest a suitable model of fan belt for it.

...Duty cycles. I get only cool water. If I select hot water on Perm Press cycle, though, I get hot water just fine. I verified that the hot water is on and the hoses are connected properly. I've read ...

heavy duty / super size capacity / quiet series 200 / 10 cycles" Any clue what this model is? Wish I could upload pics The label should be at the back where the power goes in. The label is supposed to

...Duty cycle time goes all the way down to 23 minutes at that time it should go from the wash cycle to the rinse cycle but it will not shift to the next cycle. check cold water line...onthejob,,,im ...

...duty washer. Serial #CE0702916, model # 4564290 and it it leaking water when running a cycle. It seems to leak througout the whole cycle. We are not sure where to start Probably the drain pump seal ...

...duty normal cycle gives errors codes of "sd", and "f21". have cleaned trap, and it works for next cycle, then errors out again. But Heavy duty works consistently. Points to a logic problem, I'm ...