GE Profile Prodigy WPSE4200A "check belt washer" Questions

...belt Inglis, Whirlpool and Kenmore - how to replace a pump Inglis, Whirlpool and Kenmore - how to replace or check the wig/wag solenoid assembly from American appliance Inglis, Whirlpool & ...

...check the belt & the clutch with out having to take the washer apart. The belt: Set the timer in the spin cycle and pull the timer knob to turn the washer on. If the washer drains the water and ...

...driver belt Model # WBVH6240HWW size 7 PJE 1303 for my GE washer Please check with the site : wwwespares.com  for sparesclick this link for tips on replacing belt: belt

...belt You need to check the store for the belt or ask a technician to have it checked and replaced. If the washer was built in the last 14 years and its a roper it wont have a belt if it is a full ...

...check the belt, the belt tension,. if the beltt seems worn out replace or adjust . Now check the drive for friction, use some light oil to lubricate the motor and the drive spindle. test to

...check belt tension also check condition of the belt. In order to shift into spin there is a solonoid that activates the transmission you should be able to hear it click. if it just hums it may need ...

...to be off of the pulleys or loose pulley on the main shaft or the belt may not be tight enough. Hope this helps. If all belt drive seems ok you might have a bad motor but check the belt drive

...and reach under,grab the old belt and replace the new one. No tools needed because the motor pivots on springs.Check yor pulleys to see if any of them are stiff. This greatly increases the belt

...washer took belt off but belt didnt look bad but not very tight frigidaire washer #FWX133RBS2 you can't really tighten a belt, I suggest that you change it, although it is extremely hard to replace a ...

...agitates and drains. Wont spin. Check the belt on the drive system to the motor.if the motor is working the belt might be broken. If the belt is intact it could be a relay to engage the belt