GE Profile Performance WPSF4170WAA "shaft breaking washer" Questions

Ad

Question about Maytag Washing Machines

1 Answer

...between it and the belt. pull it out, take the back off and see if something is caught or if you can turn the shaft. If the shaft seems hard to turn, most likely it's the motor breaking down in

Ad

...breaking the motor coupling can you help This is often a worn clutch or broken t-bearing support. If the t-bearing support or ball cracks and breaks or comes out of place the clutch will ...

Ad

Question about Kenmore Washing Machines

1 Answer

...washer is a Gibson top load I have the trans bolts loose in the tub and the 6 innner tub bolts as well. The outer tub springs have been taken loose but the tub will not come out.? I srayed some ...

Question about Maytag Washing Machines

1 Answer

...torque (Maytag Performa PAV2300) I took the transmission out and noticed that I can turn the lower shaft cw (with the thrust bearing assy) and the upper shaft goes through the agitation movements. ...

Question about Kenmore Washing Machines

1 Answer

...washer needs replaced; now that i have the part, i began to replace it, but the existing one is not broken; is it the problem? Was the motor working before, but no spin action. Make sure the plastic ...

Question about Whirlpool Washing Machines

1 Answer

washer ) on the side of the outer tank is also bad for leaking. See #'s 16, 17, 18 for the button catcher, grommet and clamp. Replace them all at the same time, the grommet is glued as well as clipped

...shaft from the washer drum I am replacing my transmission of my 25year old inglas washer, i lossen the transmission, but the shaft is locked into position with the drum, how do i remove the shaft. 1. ...

...edge of the cabinet. Look for broken pieces on the floor. See if you can freely rotate the motor shaft without affecting the transmission shaft. Check that the transmission shaft can be turned by ...

Question about Roper Washing Machines

1 Answer

washer and it will not come off, the washing machine will not spin so this is why i'm pulling the pump off, what do i need to do If the pump has been slowly leaking it will be stuck to the motor shaft

Not finding what you are looking for?
Washing Machines Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...