GE WJSR1070A Top Load Washer "new fill enough" Questions

...a tooth brush to clean them out. Don't forget to shut off the water first before removing the hoses to check for this. 2) - The fill valve itself may not be opening fully = time for a new fill

...stops filling before the laundry is even all wet! Is there a way to bypass the sensor? If this is a new mfg after 2011 it high efficiency style and does not fill with much water and there is no ...

...fill or complete cycle Machine stops and beeps with hot and cold lights flashing. If I restart the machine about 6 times, it finally makes it through the cycle. Looks like only a trickle of water is ...

new frigidaire front loader machine. It is perfectly level, and when the water starts to fill the tub (on any setting and water temp), after about 3-5 minutes, we get an E10 error. There are No kinks,

...new Estate Washer delivered. The hot water flow into the tub seems like a trickle compared to the cold water when it is filling. The screen in the hot water line is clear. Also after I fill the tub ...

...fill up with water I have a Whirlpool top load washer that is approx. 10+ yrs old but new to me. When I turn the washer on, water pours in but the tub never fills up. I checked the tube out the back ...

...new. I got one load out of it, now it will not fill. It will drain and spin. It has a water level sensor, so will not agitate because it will not fill. I have one cold water hose attached, the hot ...

...fill for rinsing.. I stops and makes a low buzzing noise. If i pop the start in and out the water comes out, if i do it fast enough it begins filling like regular. Im so confused.. Please help.. I ...

...fill up with enough water to get all the cloths wet,therefore there is no way they can get clean. hi Brenda. if you only got your washer 2 months ago i would not mess around with it,i would get in ...

Washer does not seem to fill with water enough. I replaced the level switch but no different. What next? Probably will have to upgrade to a new washer.