GE WBSE3120B Top Load Washer "armature" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...or similar, unplug the motor leads , and remove the motor. You will see the brushes at the armature end. remove and inspect, you should see if they have shorted by discolouration of the ...

Ad

Question about Asko Washing Machines

2 Answers

...finished? Yes it does the mean the brushes are worn out, before fitting new news,lightly rub the armature with emery cloth or sandpaper to clean armature. Plz rate my solution. Thanks. I replaced ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...now? Ive been told there are more expensive brushes available and so Im about to try those. The armature has no bumps or burrs or anything. The carbon just seems to wear away very quickly. A ...

Question about Bosch Washing Machines

1 Answer

...Get them from your nearest Bosch Spares stockist (P/N: 154740) Replace these on the motor armature, and it will be alright again. To be certain that it is indeed the Carbon brushes, open ...

...motor has blown the fuse. This can happen if they spark excessively but it can also happen if the armature goes down to earth, or the armature is faulty. You really need to test the insulation of ...

amana wash machine motor armature has shifted out of alignment.Mo The armature has fallen out of place. Don't know if a snap ring or bearing has shifted. Can anything be done to save the motor?Unit is

Question about Hotpoint Washing Machines

1 Answer

...the brushes but the motor still does not turn Could be that you have a faulty motor, check the armature for signs of shorting or burning, also make sure that the brushes are contacting the ...

Question about Fisher and Paykel Washing Machines

1 Answer

cracked armature replacement armature These cracks are normal shrinkage in the plastic and don't effect the machines operation in any way.

Question about Fisher and Paykel Washing Machines

1 Answer

...gone, which would have damaged the bearing as well as the corrosion damaging bearing surface of the armature.  To fix you need a seal kit and a new or are-welded/ ground armature shaft.  To ...

Question about Washing Machines

1 Answer

...not your motor brushers need to be looked they may have worn down and are not connecting with the armature or they may be stuck remove the motor and you will see two plastic brush holders each side ...

Not finding what you are looking for?
GE WBSE3120B Top Load Washer Logo

110 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...