GE WBB4500EWW Top Load Washer "tub fell" Questions

tub fell balance rod broken Tub fell while washing a load. Balance rod broke. Oh Sweet,

an item fell between the inner tub and outer tub. Need to remove inner tub to retrieve item. This video show how it is done:

tub or fell down inside the cabinet? If it fell in the cabinet, tip the washer against the wall and you might see what fell. If the peice fell into the tub, once you get the water and laundry out, you

...tub of Maytag Nautilus washing machine model MAH5500BWW, serial # 69761958ZH, fell off. Both screws rusted. I have done some work. I am ready to seperate the inner and outer tubs. How do I seperate ...

...tub the nail fell through the middle row of small holes and was dug into something. I tried pulling it out and it broke off below the tub. The washer was at the end of final drain cycle and there was ...

...Tub overflowing with water I had the back off to replace the lid switch ran a load this morning flooded the garage sounds like the plastic tube that goes to your water level switch has come off,,,, ...

...fell--looks like down the side of the tub. How can I retrieve it? Tricky, if it has fallen all the way down, remove the heater element from the bottom of the tub and fish it out. But thats not going ...

tub 'fell' into the machine, the top edge is not sitting as high as it used to. Any ideas? I have the front panel off now(thanks TheMobilian) and can post pics if they will be helpful. -Michael One of

...fell underneath the agitator & went underneath inside the tub i was washing clothes, when they finished i reached in to get them out. I saw a penny in the bottom of the tub when i reached for it it ...

...could be the tub seal. The tub seal keeps the water from running down the agitator shaft. Also check to see weather the drum has fell down and rubs the plastic tub, this could wear a hole in the