...Is there a water level switch on the console? If so, the problem may be the switch behind the panel or it may be a tube that connects to the switch from the bottom of the outer tub. Hope this
...level. Once these are out you can remove the front of the washer by pushing the panel down to release it. ( about 1/2 inch). Once the panel is off you then remove a screw under the top of the washer ...
Question about Fisher and Paykel Washing Machines
...washers so that it does not stop in the middle of the cycle? We recently just purchased it and had it installed. It worked fine the first few days but now it stops in the middle of a cycle until ...
...doing it.I've not had to do a single rewash since turning that water level switch higher.Honestly! The advantage of F/L washers is their low water consumpsion...Make sure you use much less ...
...water level (overriding the automatic selection) manually. Once when i had fluff on clothes, it turned out to be tissue paper from my child's jeans pockets. After cleaning the filter bag, run the ...
...Water at that stage is at right level and the inlet walve has closed. Machine is cycling. I haven't taken apart the control unit which is controlled by a stepper motor switch and some elctronics. I ...
41 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
398 Questions
323 Questions