GE WBSR3140DW Top Load Washer "water wont stop filling" Questions

...wont fill on cold wash, th water dribbles in then it stops and starts beeping, it will fill on a hot wash but wont fill to rinse as that's th cold water. MW512 The cold water solenoid valve went out. ...

...wont stop filling even when its washing. I unplug it and it still fills . Only way to stop is turn the water off. GE WBSE312082WW LF184028G Replace water inlet valve, it's stuck open. You may try ...

...water but wont stop filling and wont change to different cycle just keeps filling check water pressure, it need to be about 20psi. also remove fill hoses and check the screens for dirt. clean it if ...

water keeps filling tub and wont stop. water keeps filling tub and wont stop. 11020942992 kenmore elite need a water valve

...wont stop filling on all cycles see if the water coming in is hot or cold by turning the water faucets off and on to see if one fills and the other dont and replace the valve i had the same problem ...

...water then wont go any further there are a lot of questions of a simular nature check the diaphram switch this controls how much water is taken in and wont progress until the switch says so what you ...

...wont stop filling If it stops filling when you turn it off, the water level switch is malfunctioning. If the water runs in regardless, the water inlet valve needs replaced. kenmore series 70 model ...

...wont stop filling it will over fill with water and will not switch to wash but if you set it to drain and spin it will drain The fill solenoid is stuck in the open position. Replace it for proper ...

wont fill? water gets to the machine through the hoses, fill light is on, but water wont fill in machine check your water inlet valve. Check it for continuity with a multi meter it should show Ohms or

...water is filling up it wont cut off at the desired height. Water valve is bypassing and need to be replaced or the water level switch control is out of order. A remote possibily is a leaking pressure ...