pressure switch or the pipe leading to the pressure switch being clogged with soap. Need to check out the first by switching on the machine and turning on the water , turn off the power and listen for
...pressure switch tube is clogged with lint or bladder in pressure switch is bad. disconnect power to washer open timer console look for a clear rubber hose disconnect fron switch and blow in tube a ...
Question about LG Washing Machines
...pressure switch error The manufacturer has assigned this error or fault code to indicate that the machine is overfilling with water. This washer is equipped with a water level pressure switch. As the ...
...or perishing if ok check water level switch blow into it see if it clicks if not replace also while blowing hold pressure to see if the diaphragm in the pressure switch is not perished keep me ...
pressure switch is bad or the valve is stuck open. The way to figure which is: when the tub is filling pull the power cord out. If when pulling the power cord out the water stops it means the pressure
...pressure switch. As the machine fills, the pressure increases on the switch, at the set pressure, the switch cuts power to the water inlet valve and the water stops flowing into the washer. If the ...
...pressure switch -Electronic pressure switch, wiring , main PCB E31- Fault in electronic pressure switch circuit -Main PCB (fault in electronic pressure switch circuit) E32(E10)-Calibration error in ...
...pressure switch. As the machine fills, the pressure increases on the switch, at the set pressure, the switch cuts power to the water inlet valve and the water stops flowing into the washer. If the ...
Question about Washing Machines
...pressure switch that does two things first it shuts of the tap inlet solenoid and then progresses the washer to wash cycle so you have three areas to check the hose up the side is still properly ...
Question about LG Washing Machines
...pressure switch. As the machine fills, the pressure increases on the switch, at the set pressure, the switch cuts power to the water inlet valve and the water stops flowing into the washer. If the ...
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions