Knocking sound in agitator It looks like it's the agitator.. there's a loud knocking sound in the washing cycle... the washing machine is well balance, everything looks ok... except of the sound. I ...
...knocking about Any ideas? May be a problem with agitator gear box,open on wash cycle and use screwdriver to by pass cut off switch by pushing screwdriver down on little switch that is located where ...
Question about Washing Machines
...washing machine makes a loud clicking (knocking) sound and the lights dim with each knock during the rinse cycle. The sound is not heard during the agitate or drain cycles. The agitate and drain ...
...agitator with knocking sound I have a whirlpool clothes washer lsc8244dz0 that has recently began giving a knocking sound coming from the agitator. The agitator now moves slower than usual. What are ...
...knocking sound in wash/agitation cycle. Please let me know what would be the cause ?Thanks! Do you get same sound if you run through a wash cycle empty (no clothes?) using detergent? If so, then ...
...knocking noises when it spins and agitates. I tried holding the agitator while it was spinning to see if that would stop the noise and it didn't. Check to see that the springs that hold the tub ...
Question about GE Washing Machines
...washing machine Model # GLWN2800D1WS . machine normally makes a knock sound when shifting cycles but now has started making the same knock sound randomly while agitating. Faulty washer transmission. ...
Question about Maytag Washing Machines
Agitator fall off and knocking noise during spin cycle My agitator keeps falling off. I am able to put the agitator back on , and I tighten the bolt but it keeps falling off. Also, during the spin ...
Question about Kenmore Washing Machines
...washing machine has doesn't spin. It makes this knocking sound when I turn it on. I have the same "OLD STINKY" water still sitting in the wash from my last load of clothes!! Please help!! How do I ...
...agitator knocking/squeaking I pulled the agitator out, it is fine as well as the block. Twist the shaft & it knocks loudly (by hand). Transmission? Check the bearings... sounds like one of the ones ...
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions