...hub nut on my GE Profile washer. Is there a way to remove the nut without cutting it off? 1st DO NOT try to cut the hub nut off. This is a left hand thread so it has to be loosened by turning ...
spanner nut off. I have tried hitting it with a hammer. I have used PB Blaster on it. It will not budge. Please advise. Are you aware of the fact that the hub nut on a GE washer has a left hand thread
Question about GE Washing Machines
...hub nut without success. Am I wasting my time removing the hub nut? Is the transmission shot or is it just the inner seal? Our clothes had grease on them from the transmission seal leaking. Also, any ...
Question about LG Washing Machines
how do i remove the hub nut on a lg top loader.has it got a left hand thread? Normal thread. Counterclockwise to loosen. Hold drum or give hard quick hit to wrench handle.
...nut driver or 5/16 ¼ socket on an extension to remove front panel see page 41 of the SM. 1. Lean the washer back and blocked in that position for a better reach angle. Rotate 3/8? clutch Pulley Bolt ...
Question about GE Washing Machines
...nut driver or 5/16 ¼ socket on an extension to remove front panel see page 41 of the SM. 1. Lean the washer back and blocked in that position for a better reach angle. Rotate 3/8? clutch Pulley Bolt ...
Question about LG Washing Machines
hub fixing nut inside the machine how i open it You should be able to access the cluch from the back and bottom of the machine. You may need an inpact gun to remove the nut. check to see if it is left
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions