GE WSXH208A Front Load Washer "wrong whirlpool agitating fills" Questions

...replaced the auto sensing and time control...still not working. Any other ideas on what could be wrong? did you get it? same ...

Whirlpool Ultimate Care II Plus Washer Model: LSQ9264HZ0 The washer fills with water, but no agitation or spin. What's wrong??? if you hear the motor running while it is supposed to be agitating or ...

...Whirlpool model LA5710XPW1 top load washer. It started to make a clicking noise a week or less before it stopped working. Now it goes through it's cycle for washing except the agitator won't turn and ...

...with water. Wont agitate, spin or drain. Need help with how to drain the water and what could be wrong with it. The lid switch, get something to hold it down to make machine work. Turn machine on ...

...Whirlpool Quiet Wash large capacity washer. It was in the middle of a wash cycle meaning it filled but when it was time for the agitator to start it didn't and instead it made a very loud grrrrrrring ...

...fills up and won't agitate. It seems taht theres something wrong with the sensor for the lid position. I have to jiggle the lid pop out the lid and close it then pop it back down again to get it to ...

...wrong? Many washers produced by Whirlpool® use a small, relatively inexpensive motor coupling. It's plastic and rubber and is mounted to the shaft of the motor on one side, and to the ...

LSQ8243H does not agitate and spin after water was filled, but pump the water out. What is wrong? If you hear motor running, then probably bad coupler. Lately I have been seeing more and more bad ...

...agitating when you start it and it seems to be loose and rocks back and forth the agitator will rock back an forth. what you will need to watch for is how it washes. fill it will water at a low water ...

...whirlpool ultimate care II washer fills with water and agitates but stops on the next cycle the basket is fill with water. I tried different cycles delicate or permanent press the same results. what ...