GE WSXH208A Front Load Washer "causes washing machine gasket tear" Questions

Ad

Question about GE Washing Machines

1 Answer

...machine? Open the door and gently pull on the grey rubber gasket and check all around it for holes / tears. There are three tiny holes in the 'wall' at the bottom that are supposed to be there, but ...

Ad

...washing and water is running water runs out through the front door If the machine is working alright otherwise , then there is an alignment problem on the door or your seal gasket is worn out. Since ...

Ad

Question about GE Washing Machines

3 Answers

...machine about 2 years old. What is the likely cause? Check the rubber bellow (gasket) around the door. This is the symptom of a door gasket that it starting to leak. Pull the rubber folds back and ...

i have a puddle of water under the topload washer after use. what would cause this? leaking hose or inspect the door boot or gasket for tears the hoses that may be leaking are located in the inside of

washing machine purchased in 2008 water leaks out front center of door during the wash and rinse cycle Check the door gasket for any damage. A rip or a tear could be the cause of the leak. For a small

Question about Washing Machines

1 Answer

front load washer door gasket keeps tearing purchased in 2006 This normally happens when clothes are not put in all the way and catch on the boot or the unit is off balance alot causing alot of stress

...gasket has a 1" tear in it which I patched with a rubber tire patch for now. Two of the locking nuts for the leveling of the machine were loose it went out of level causing the machine to rock and ...

leaking water,what is causing it 2 shake so bad&has a tear in front gasket,how much are parts(roughly),Thanks ! How long to repair ? Most likely suspension parts related. Maybe a bearing or spider arm

Question about GE Washing Machines

2 Answers

gasket causing a small leak. Oversudsing can also cause leaks. The front door seal is referred to as the "bellow". They will wear out with age and may become mishapened from repeated pressure from the

Question about Bosch Washing Machines

2 Answers

machine. Thank you Hello, welcome to FixYa. Hopefully the info below will supply you with the assistance to get the door seal for your WFMC series Bosch. They should have anything you need. http://www

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

1,215 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Virgil Watts

Level 2 Expert

267 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...