...balance with no visible problems (top and front removed , no error code) I had a front loading washer (not Kenmore) that bumped, banged, and walked all over the floor. Called a service tech. The ...
...balance and over time, the concrete chips away throwing off the balance. It didn't make much sense to me at first, but when they hauled the machine out of my house, I noticed there was a sand-like ...
Question about Frigidaire Washing Machines
...concrete on has rusted and broken. Can I purchase a new counter-balance, or just chuck the machine and buy a new one? It is about 10 years old... Check with a company online called sundberg appliance ...
...concrete balance blocks come loose and cause a banging noise unplug and take the top off check the concrete block on the top off the outer drum to see if it moves about tighten it up if loose then ...
...balance/ causing the machine to jump around in spin cycle 1. it may be due to a heavy wet load ,like towels unbalancing the machine, try less load or slower spin ,then fast spin 2. could be concrete ...
...like its not washing machine is level but spins like it is out of balance when loaded or unloaded, could this be an internal problem Could be loose concrete balance weight or weights, or worn ...
Question about Washing Machines
...balance, is the machine jumping ? about if so the concrete weight to stop it jumping has come loose in the on the top of the drum housing apart from that I can only wait for your response cheers ...
balance around the drum, ( normally heavy concrete blocks)... locate the fixing bolts and tighten them up ....should sort your prob. Also make sure that the washer is fairly even and tight on its legs
...concrete balance wieghts are replaceable, but you need to make sure the fixing points on the drum are o/k, as sometimes they fracture or wear, and if this the case, then you will have to replace the ...
1,215 questions posted
Usually answered in minutes!
992 Questions
371 Questions
398 Questions
323 Questions
255 Questions