GE Profile Prodigy DPSR513GA Dryer "keep running starts" Questions

the button in but does not stay running when i let go. bottom line i have to keep my hand on the start button to keep it running you will need to replace the start button.That will correct the problem

keep running It may be the centrifugal switch on the motor. The push button starts the motor and as the motor spins up to speed the centrifugal switch closes to keep the motor running. Hope this helps

keep running until the door is opened. When the door is closed again, the dryer stays off until the start button is pushed, & then the same thing happens, continuous running. when the door is opened &

...running when release the start button We have a Kenmore Electric Dryer (model: 110.64972300). It will run when we keep pushing the start button down. But it stops immediatly if we release thevstart ...

...starting button is released I believe that dryer uses a centripetal switch in the motor to keep it running and kill the power if it stalls. I do not have a manual but I have seen this in other

...running or heat you have to keep the start button pushed in i order to run the dryer but it will not heat and the timer will not run just happend it was running fine any clues. DO NOT KEEP THE BUTTON ...

...holding in on the door switch to let it run for awhile...you can shut the door real fast and it should keep running... if none of this works and it still will not start and just hum...the motor is ...

keep the motor and heater running untill the timer switch or door switch cut the power to the relay and the relay opens. The latching relay has failed or disconnected if all the cables are attached to

keep motor running Possible bad relay. When you push the start button, you engage the start capacitor long enough to get the motor turning. When you release, either a run capacitor kicks in or a relay

...keep running the start button will not keep the dryer running There is a relay which goes bad mounted in the control panel. Some times it is part of the start switch and some a separate unit next to ...