GE DBXR463EBWW Electric Dryer "timer keeps going" Questions

timer just keeps going. The separent on switch doesn't do anything. (maybe because the timer says its already on?). What could be the problem? Please help. I had to unplug it from the wall to stop the

...Keeps going and going. I have to keep careful watch and stop it myself. one or more of the timer cams is stuck. if the timer is electronic then the triac used for the motor contactor is gated closed. ...

...timer won't keep going. It buzzes before it should. Then, if I help it a little then it will keep going. You will need to replace timer.Go towww.marcone.com If this was helpful please rate me. IMUFO2 ...

...timer keeps running I have a Maytag Dryer that is about 8 years old in great condition. Never had an issue until now as my timer just keeps running no matter where I turn it to....any ideas? I have ...

...keeps running, the timer never advances. It does heat. in auto dry the timer motor receives voltage to advance by way of the cycling thermostat.[each time the thermostat opens to stop the heat the ...

my dryer stop drying cloths also timer is not working its keep rotating unless you turn off The timer may be the reason for the wet clothes, it may not be sending power to the heating element. I would

...keeps shutting off. have to tap/jiggle timer knob to re-start. does this mean complete timer is bad and needs replacing? Model # MEDC300XW0 Type: DWSR-ELE-2406028-CV54 If you have to wiggle the timer ...

...timer isn't doing anything, the dryer will just keep going until I open the door to turn it off. Any help and advise would be much appreciated. Thank you It is important not to open the door of the ...

...timer keeps going around and around this will be the problem, however there are thermostats inside the dryer and if you have it set on a HEAT and not a TIMED setting the thermostats won't advance the ...

...going. sounds like a bad timer or timer motor , check it with a multimeter, they have points inside and can seize up and burn metal to the contact points . then they stick at a certain point on the ...