GE DVL223EBWW Electric Dryer "hums turn drum" Questions

...drum doesn't turn. the humming noise is from the motor,see if you can spin the drum by hand,if it moves you have a bad motor,if it's hard to turn you could have something stuck in the blower wheel or ...

hums when button is pushed, but drum does not turn. either the belt is broken that turns the motor or thr idler tension pulley is bad, if it were a motor problem the breaker most likely will trip If I

...drum will turn by hand. If so, leave the door open but push the light switch button down and start the unit. Once you hear the humming sound, manually turn the drum with your hand to start. If the ...

hums but wont turn. With 2 people pressed the start button again, held the door switch, reached in turned the drum, it hummed stopped humming then no more nothing. Kenmore 90 series dryer 1999. Sounds

...hums When you turn the dryer on the motor just hums the drum turns freely when you turn it by hand and it heats up just fine but the motor doesnt turn the drum Sounds like the belt has been stretched ...

...turn the drum the motor is bad, it might start after you spin the drum but it will stop again,if you can't turn it the belt could be locked up on something or something is stuck in the blower wheel ...

hums and starts hard you will need a motor. If it don't hum check the drum rollers & glides on the front. Check the idler pully and belt. Drum rollers should turn easy if not either replace of try

...turn but a humming noise When door is closed it hums without the start button being pushed. f you hear the motor humming and not starting at all it most likely has a severe friction problem with the ...

...drum belt has broken and the motor is not able to turn the drum. The humming you hear is most likely the motor turning as it should, but due to the broken belt, the motor is not able to turn the

...turn the dryer to on...it just humm's If the drum is not turning and the hum is a nice quiet hum, then the belt on the drum has broken. The hum you hear is the motor turning without the belt. If this ...