GE DBXR463EDWW Electric Dryer "belt blower" Questions

Ad

Question about Kenmore Dryers

1 Answer

...blower belt. Locate the tension pulley in between the motor and the blower. Pull the tensioner back to relieve the tension on the belt. Remove the belt by pulling it off the motor and the blower.5 ...

Ad

...belt runs blower and tumbler,it could be lose belt,or worn out. the blower creates draft in dryer,and tumbler to fluff up. if the speed of tumbler or blower is not rite it will take long time to ...

Ad

...blower wheel on my maytag, the dryer now has difficulty tumbling with a load in. Without a load it appears to tumble fine. Any suggestions? Check the drive belt and belt tensioner. From the way you ...

...blower and the belt goes around it (it is a small belt), however I can't tell where the belt goes from there, what is supposed to make it spin around? It is a newer dryer maytag bravos model number ...

Question about Maytag Dryers

1 Answer

blower motor belt the belt for the blower motor keeps coming off. it throws the nut that holds the belt on. don't understand what is causing this. It could be belt or belt idler problem or rollers or ...

how to replace blower belt on MEBD800VC DRYER. 8544742 Replacing Blower Belt PS990355 AP3872523 1180047 How To Replace Dryer Belt on Whirlpool Models

...belt? No normally the blower is not driven by a belt, it is a motor with a blower wheel attached on the end of it...if the blower motor is not working then you will have to replace the blower motor ...

...belt. Blower wheel, blower wheel belt, idler pulley, and drum belt. Parts needed. LME4600 W2. 1964 dryer Hi Alisa Wilkerson...Try one or both of these on-line websites...they also have phone ...

Question about Dryers

1 Answer

Blower Belt Kenmore Elite Model 110.67042601 the belt for the blower has come off and I only see a threaded shaft on the top of the blower That is were the belt rides on the shaft. The belt either ...

...blower belt on whirlpool cabrio dryer model wed7800xw0 belt came off pulley...how do I replace if I cannot see where bekt goes first put pulley onto blower fan housing i think you have to counter ...

Not finding what you are looking for?
GE DBXR463EDWW Electric Dryer Logo

154 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...