GE Profile Harmony DPGT750GC Gas Dryer "centrifugal switch" Questions

Ad

...centrifugal switch built into the motor. Once the motor is running, releasing the switch doesn't matter because the motor gets it's power directly from the timer to the motor thru the centrifugal ...

Ad

centrifugal switch on the motor is not working correctly. The other scenario would be the timer. There should be a schematic located somewhere inside the control console. Look for the wires that go to

Ad

...centrifugal switch in the motor. In the normal operation this switch is open when off and closes after the motor reaches 80% or better running speed. The "start" switch is a momentary switch. and the ...

...centrifugal switch has failed within the dryer. The centrifugal switch maintains electrical flow to the motor after the start button has been released (this is a safety measure) When you press the ...

...centrifugal start switch in the motor is malfunctioning -- the motor is running on the start winding and not switching (via the centrifugal start switch) to the run winding. The smell is because the ...

Question about GE Dryers

1 Answer

...centrifugal switch in the motor kicks in and gives power to the motor until the timer stops it or the door is opened.Your motor centrifugal switch could be bad due to poor contact or heavy linting in ...

...centrifugal switch on the motor has probably failed. This switch is engaged when the motor starts turning and keeps it running when the start switch is released. Often, the tiny springs on the ...

Question about Miele Dryers

1 Answer

...centrifugal switch on the dryer motor. This switch connects the start winding of the motor which provides additional torque at startup. Once the dryer is up to speed, the switch disconnects the start ...

Question about Whirlpool Dryers

1 Answer

...centrifugal switch failure. Try lubricating centrifugal switch if stuck. If that does not work, replace motor. Be sure to disconnect dryer before working on it. Centrifugal switch assembly is located ...

...centrifugal switch on the motor. When you push the start button, the motor starts turning, then the centrifugal switch on the motor clicks in and keeps the motor running until the timer or the door ...

Not finding what you are looking for?
GE Profile Harmony DPGT750GC Gas Dryer Logo

195 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...